>
>
2026-10-27
Amphenol LTW has introduced a line of heavy-duty fiber optic adapters intended for outdoor and industrial data links, where stable transmission and connector sealing are critical. The adapters are built to carry high-bandwidth, high-speed traffic while maintaining signal integrity in demanding conditions, and the company says they meet industrial-grade ingress protection requirements. The series supports LC and SC interface standards and is rated IP67 when fully mated.
The adapters are designed for outdoor and industrial high-frequency transmission, addressing the difficulty of coupling fiber optic cables in severe weather. Their principal advantages are a high protection rating and mechanical stability, which suit them to outdoor equipment installations that place strict demands on data throughput.
Each connection is secured by a three-point locking structure, a mechanical design intended to prevent loosening under vibration and to keep mated pairs seated during long-term service. The adapters accommodate cable diameters from 2.0 mm to 6.8 mm, covering a broad range of field cabling.
The series operates across a temperature range of −40°C to 105°C and carries a UL 94V-0 flame retardancy rating, specifications that position the hardware for deployment in both cold and high-heat climates.
| Specification | Parameter |
|---|---|
| Interface type | LC and SC |
| Ingress protection | IP67 (when mated) |
| Accepted cable diameter | 2.0 mm to 6.8 mm |
| Locking mechanism | Three-point structure |
| Operating temperature | −40°C to 105°C |
| Flame retardancy | UL 94V-0 |
| Vibration test | 10 Hz to 55 Hz at 1.52 mm amplitude |
System integrators should match the adapter model to the actual cable diameter in use, which falls between 2.0 mm and 6.8 mm. Selecting a unit outside that window would compromise both the mechanical fit and the seal.
The three-point locking mechanism provides dependable protection against accidental disengagement. The IP67 rating, however, applies only when the mating parts are fully engaged; installers must confirm that every locking point is correctly closed before the assembly is placed in service.
Vibration testing spans 10 Hz to 55 Hz at an amplitude of 1.52 mm, a profile that reflects the mechanical stress encountered on outdoor mounts and equipment subject to continuous movement. Combined with the locking structure, the testing is intended to demonstrate that connections hold under sustained mechanical load.
The wide operating temperature window allows the adapters to serve infrastructure across extreme climates, from cold-exposure sites to high-temperature enclosures. The UL 94V-0 flame rating adds a further margin of safety in high-heat or electrically active environments.
Skontaktuj się z nami w każdej chwili
